|
|
SparkFun Accessories The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
- DEV-15837
- SparkFun
-
1:
$27.65
-
2In Stock
|
Mouser Part #
474-DEV-15837
|
SparkFun
|
SparkFun Accessories The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Carrier Boards
|
Weather:bit
|
|
|
|
SparkFun Accessories The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
- DEV-16789
- SparkFun
-
1:
$8.39
-
14In Stock
|
Mouser Part #
474-DEV-16789
|
SparkFun
|
SparkFun Accessories The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Shields
|
Qwiic Shield
|
|
|
|
SparkFun Accessories The SparkFun MicroMod Data Logging Board offers a highly customizable low-power data logging platform using the MicroMod system allowing you to choose your own Processor to pair with the Carrier Board. The Data Logging Carrier Board breaks out conne
- DEV-16829
- SparkFun
-
1:
$35.00
-
6In Stock
|
Mouser Part #
474-DEV-16829
|
SparkFun
|
SparkFun Accessories The SparkFun MicroMod Data Logging Board offers a highly customizable low-power data logging platform using the MicroMod system allowing you to choose your own Processor to pair with the Carrier Board. The Data Logging Carrier Board breaks out conne
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Carrier Boards
|
|
|
|
|
SparkFun Accessories Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the
- DEV-16885
- SparkFun
-
1:
$31.26
-
6In Stock
|
Mouser Part #
474-DEV-16885
|
SparkFun
|
SparkFun Accessories Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Carrier Boards
|
|
|
|
|
SparkFun Accessories The ANN-MB-00 is a high-performance active GNSS antenna designed to take full advantage of modern multi-band receivers. Unlike standard single-band antennas this unit is tuned to receive both L1 and L2 frequencies across GPS GLONASS Galileo and B
- GPS-15192
- SparkFun
-
1:
$167.67
-
12In Stock
|
Mouser Part #
474-GPS-15192
|
SparkFun
|
SparkFun Accessories The ANN-MB-00 is a high-performance active GNSS antenna designed to take full advantage of modern multi-band receivers. Unlike standard single-band antennas this unit is tuned to receive both L1 and L2 frequencies across GPS GLONASS Galileo and B
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Antennas
|
GNSS Multi-Band Magnetic Mount Antenna - 5m
|
|
|
|
SparkFun Accessories Pogo pins make life so much easier when you are trying to program without having to solder a single thing and when you attach them to an In-system programming (ISP) adapter they become instantly better. This simple kit allows you to do just that. T
- KIT-23451
- SparkFun
-
Restricted Availability
|
Mouser Part #
474-KIT-23451
|
SparkFun
|
SparkFun Accessories Pogo pins make life so much easier when you are trying to program without having to solder a single thing and when you attach them to an In-system programming (ISP) adapter they become instantly better. This simple kit allows you to do just that. T
|
|
|
|
|
|
|
Adapters
|
ISP Pogo
|
|
|
|
SparkFun Accessories Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration?This is your standard solderless breadboard - three binding posts two power buses black aluminum plate backing. It works with a wide variet
- PRT-00112
- SparkFun
-
1:
$25.85
-
4In Stock
|
Mouser Part #
474-PRT-00112
|
SparkFun
|
SparkFun Accessories Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration?This is your standard solderless breadboard - three binding posts two power buses black aluminum plate backing. It works with a wide variet
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breadboards
|
|
|
|
|
SparkFun Accessories Break Away Headers - Straight
- PRT-00116
- SparkFun
-
1:
$2.97
-
125In Stock
|
Mouser Part #
474-PRT-00116
|
SparkFun
|
SparkFun Accessories Break Away Headers - Straight
|
|
125In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
Headers & Wire Housings
|
|
|
|
SparkFun Accessories Standard 22 AWG solid Black hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
- PRT-08022
- SparkFun
-
1:
$5.25
-
43In Stock
|
Mouser Part #
474-PRT-08022
|
SparkFun
|
SparkFun Accessories Standard 22 AWG solid Black hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
|
|
43In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
|
|
|
|
SparkFun Accessories Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
- PRT-08023
- SparkFun
-
1:
$5.25
-
32In Stock
|
Mouser Part #
474-PRT-08023
|
SparkFun
|
SparkFun Accessories Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
|
|
32In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
|
|
|
|
SparkFun Accessories Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
- PRT-08024
- SparkFun
-
1:
$5.25
-
14In Stock
|
Mouser Part #
474-PRT-08024
|
SparkFun
|
SparkFun Accessories Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
|
|
|
|
SparkFun Accessories Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
- PRT-08026
- SparkFun
-
1:
$4.73
-
20In Stock
|
Mouser Part #
474-PRT-08026
|
SparkFun
|
SparkFun Accessories Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
|
|
20In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to fem
- PRT-08431
- SparkFun
-
1:
$8.01
-
9In Stock
|
Mouser Part #
474-PRT-08431
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to fem
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories Screw Terminals 5mm Pitch (2-Pin)
- PRT-08432
- SparkFun
-
1:
$1.68
-
48In Stock
|
Mouser Part #
474-PRT-08432
|
SparkFun
|
SparkFun Accessories Screw Terminals 5mm Pitch (2-Pin)
|
|
48In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
Fixed Terminal Blocks
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
- PRT-09194
- SparkFun
-
1:
$51.09
-
1In Stock
|
Mouser Part #
474-PRT-09194
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs o
- PRT-09386
- SparkFun
-
1:
$57.87
-
1In Stock
|
Mouser Part #
474-PRT-09386
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs o
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
- PRT-09389
- SparkFun
-
1:
$7.55
-
12In Stock
|
Mouser Part #
474-PRT-09389
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
- PRT-09390
- SparkFun
-
1:
$57.87
-
4In Stock
|
Mouser Part #
474-PRT-09390
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories 9V to Barrel Jack Adapter
- PRT-09518
- SparkFun
-
1:
$5.49
-
12In Stock
|
Mouser Part #
474-PRT-09518
|
SparkFun
|
SparkFun Accessories 9V to Barrel Jack Adapter
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Adapters
|
DC Power Cords
|
|
|
|
SparkFun Accessories Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie
- PRT-09567
- SparkFun
-
1:
$10.60
-
9In Stock
|
Mouser Part #
474-PRT-09567
|
SparkFun
|
SparkFun Accessories Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breadboards
|
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
- PRT-09914
- SparkFun
-
1:
$1.91
-
253In Stock
|
Mouser Part #
474-PRT-09914
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
|
|
253In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10362
- SparkFun
-
1:
$1.91
-
65In Stock
|
Mouser Part #
474-PRT-10362
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
65In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
- PRT-10363
- SparkFun
-
1:
$2.29
-
85In Stock
|
Mouser Part #
474-PRT-10363
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
|
|
85In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10364
- SparkFun
-
1:
$2.29
-
101In Stock
|
Mouser Part #
474-PRT-10364
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
101In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10365
- SparkFun
-
1:
$2.41
-
58In Stock
|
Mouser Part #
474-PRT-10365
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
58In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
Canada