|
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount momentary switch with an illuminated yellow LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button i
- COM-11969
- SparkFun
-
1:
$17.06
-
Non-Stocked
|
Mouser Part #
474-COM-11969
|
SparkFun
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount momentary switch with an illuminated yellow LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button i
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount momentary switch with an illuminated white LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is
- COM-11970
- SparkFun
-
1:
$17.06
-
Non-Stocked
|
Mouser Part #
474-COM-11970
|
SparkFun
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount momentary switch with an illuminated white LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories RedBot Sensor Mechanical Bumper
- SEN-11999
- SparkFun
-
1:
$9.91
-
Non-Stocked
|
Mouser Part #
474-SEN-11999
|
SparkFun
|
SparkFun Accessories RedBot Sensor Mechanical Bumper
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Sensors
|
|
|
|
|
SparkFun Accessories CR1225 lithium metal 3V 12mm 47mAh coin cell batteries. Perfect small battery for miniature sensor node applications.These batteries are sold in single units.Note: This battery is not available to ship to Alaska or Hawaii or through any express serv
- PRT-00337
- SparkFun
-
Shipping Restricted
|
Mouser Part #
474-PRT-00337
|
SparkFun
|
SparkFun Accessories CR1225 lithium metal 3V 12mm 47mAh coin cell batteries. Perfect small battery for miniature sensor node applications.These batteries are sold in single units.Note: This battery is not available to ship to Alaska or Hawaii or through any express serv
|
|
|
|
|
|
Battery Holders
|
Battery Holder - Coin Cell
|
|
|
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount momentary switch with an illuminated green LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is
- COM-11968
- SparkFun
-
1:
$17.06
-
Non-Stocked
|
Mouser Part #
474-COM-11968
|
SparkFun
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount momentary switch with an illuminated green LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than
- PRT-08073
- SparkFun
-
1:
$2.67
-
Non-Stocked
|
Mouser Part #
474-PRT-08073
|
SparkFun
|
SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories We carry several data logging products which have microSD sockets on them: OpenLog Artemis and the Qwiic OpenLog to name but two. They're great for logging data to a microSD card but when it comes to reading the logged data quickly you usually have
- DEV-19217
- SparkFun
-
1:
$50.25
-
Non-Stocked
|
Mouser Part #
474-DEV-19217
|
SparkFun
|
SparkFun Accessories We carry several data logging products which have microSD sockets on them: OpenLog Artemis and the Qwiic OpenLog to name but two. They're great for logging data to a microSD card but when it comes to reading the logged data quickly you usually have
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Logging Shields
|
Dual-Port Logging Shield
|
|
|
|
SparkFun Accessories Sometimes when you have too many choices it's hard to make a good decision. In fact there are times when you just want a bag of LEDs just one of each that's all you want. Well here you go! The LED Mixed Bag contains one each of our 10mm LEDs. Thi
- COM-13326
- SparkFun
-
1:
$16.70
-
Non-Stocked
|
Mouser Part #
474-COM-13326
|
SparkFun
|
SparkFun Accessories Sometimes when you have too many choices it's hard to make a good decision. In fact there are times when you just want a bag of LEDs just one of each that's all you want. Well here you go! The LED Mixed Bag contains one each of our 10mm LEDs. Thi
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Optoelectronics
|
LED
|
|
|
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated white LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is
- COM-11975
- SparkFun
-
1:
$16.01
-
Non-Stocked
|
Mouser Part #
474-COM-11975
|
SparkFun
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated white LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories USB as a power connection standard is common these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC power supply will do 5V a
- TOL-16893
- SparkFun
-
1:
$14.49
-
Non-Stocked
|
Mouser Part #
474-TOL-16893
|
SparkFun
|
SparkFun Accessories USB as a power connection standard is common these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC power supply will do 5V a
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Powers
|
USB Wall Charger - 5V, 2A
|
|
|
|
SparkFun Accessories Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They ca
- COM-10594
- SparkFun
-
1:
$1.80
-
Non-Stocked
|
Mouser Part #
474-COM-10594
|
SparkFun
|
SparkFun Accessories Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They ca
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is p
- COM-11972
- SparkFun
-
1:
$17.74
-
Non-Stocked
|
Mouser Part #
474-COM-11972
|
SparkFun
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is p
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories The Day of the Dead only comes around once a year but what if you could celebrate it any day you want? With this black version of the Day of the Geek soldering kit you will be able to learn the basics of soldering by being able to assemble a light-up
- KIT-20118
- SparkFun
-
1:
$13.45
-
Non-Stocked
|
Mouser Part #
474-KIT-20118
|
SparkFun
|
SparkFun Accessories The Day of the Dead only comes around once a year but what if you could celebrate it any day you want? With this black version of the Day of the Geek soldering kit you will be able to learn the basics of soldering by being able to assemble a light-up
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Badge Kits
|
Soldering Badge Kit
|
|
|
|
SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
- PRT-08870
- SparkFun
-
1:
$2.29
-
Non-Stocked
|
Mouser Part #
474-PRT-08870
|
SparkFun
|
SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories These are massive single pole - double throw (SPDT) sealed relays. This means that when current is applied to the coil it throws a simple changeover switch terminating the connection from the NC contact to ground and closing the NO contact. Use them
- COM-10924
- SparkFun
-
1:
$6.86
-
Non-Stocked
|
Mouser Part #
474-COM-10924
|
SparkFun
|
SparkFun Accessories These are massive single pole - double throw (SPDT) sealed relays. This means that when current is applied to the coil it throws a simple changeover switch terminating the connection from the NC contact to ground and closing the NO contact. Use them
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories This is a PCB edge mount SMA RF connector. These connectors are perfect for prototyping with the GPS and Cellular devices that require an antenna connection. Each connector is equipped with a female signal pin and will correctly mate with the origin
- WRL-23187
- SparkFun
-
1:
$2.29
-
Non-Stocked
|
Mouser Part #
474-WRL-23187
|
SparkFun
|
SparkFun Accessories This is a PCB edge mount SMA RF connector. These connectors are perfect for prototyping with the GPS and Cellular devices that require an antenna connection. Each connector is equipped with a female signal pin and will correctly mate with the origin
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Connectors
|
SMA
|
|
|
|
SparkFun Accessories Please note these machines are built to order & have an estimated lead time of 10 days before shipping This is the Shapeoko Standard Z-Plus No Router 65mm a desktop 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non
- TOL-16978
- SparkFun
-
1:
$2,516.25
-
Non-Stocked
|
Mouser Part #
474-TOL-16978
|
SparkFun
|
SparkFun Accessories Please note these machines are built to order & have an estimated lead time of 10 days before shipping This is the Shapeoko Standard Z-Plus No Router 65mm a desktop 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
3-Axis CNC Machine Kits
|
Shapeoko Standard Z-Plus No Router 65 mm
|
|
|
|
SparkFun Accessories Here we have some right-angle headers with 40x3 pins. They are break away and will take a bit of effort to break this beast where you need it to break. That being said if you need a big header like this it's easy enough to break it where you need.
- COM-10095
- SparkFun
-
1:
$9.53
-
Non-Stocked
|
Mouser Part #
474-COM-10095
|
SparkFun
|
SparkFun Accessories Here we have some right-angle headers with 40x3 pins. They are break away and will take a bit of effort to break this beast where you need it to break. That being said if you need a big header like this it's easy enough to break it where you need.
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories Please note these machines are built to order & have an estimated lead time of 10 days before shipping This is the Shapeoko Standard Z-Plus No Router 65mm a desktop 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non
- TOL-16979
- SparkFun
-
1:
$2,516.25
-
Non-Stocked
|
Mouser Part #
474-TOL-16979
|
SparkFun
|
SparkFun Accessories Please note these machines are built to order & have an estimated lead time of 10 days before shipping This is the Shapeoko Standard Z-Plus No Router 65mm a desktop 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
3-Axis CNC Machine Kits
|
Shapeoko Standard Z-Plus No Router 69 mm
|
|
|
|
SparkFun Accessories These 10 segment bar graph LEDs have many uses. With a compact footprint simple hookup they are easy for prototyping or finished products. Essentially they are 10 individual blue LEDs housed together each with an individual anode and cathode conn
- COM-09937
- SparkFun
-
1:
$4.50
-
Non-Stocked
|
Mouser Part #
474-COM-09937
|
SparkFun
|
SparkFun Accessories These 10 segment bar graph LEDs have many uses. With a compact footprint simple hookup they are easy for prototyping or finished products. Essentially they are 10 individual blue LEDs housed together each with an individual anode and cathode conn
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Displays
|
10-Segment LED Bar Graph
|
|
|
|
SparkFun Accessories Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long 26 AWG j
- PRT-16662
- SparkFun
-
1:
$1.91
-
Non-Stocked
|
Mouser Part #
474-PRT-16662
|
SparkFun
|
SparkFun Accessories Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long 26 AWG j
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This tiny little guy is the ALS-PT19 an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking fo
- SEN-12566
- SparkFun
-
1:
$1.68
-
Non-Stocked
|
Mouser Part #
474-SEN-12566
|
SparkFun
|
SparkFun Accessories This tiny little guy is the ALS-PT19 an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking fo
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Sensors
|
|
|
|
|
SparkFun Accessories These 10 segment bar graph LEDs have many uses. With a compact footprint simple hookup they are easy for prototyping or finished products. Essentially they are 10 individual green LEDs housed together each with an individual anode and cathode con
- COM-09938
- SparkFun
-
1:
$5.46
-
Non-Stocked
|
Mouser Part #
474-COM-09938
|
SparkFun
|
SparkFun Accessories These 10 segment bar graph LEDs have many uses. With a compact footprint simple hookup they are easy for prototyping or finished products. Essentially they are 10 individual green LEDs housed together each with an individual anode and cathode con
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Displays
|
10-Segment LED Bar Graph
|
|
|
|
SparkFun Accessories This is a right angle 5mm addressable LED. It sounds boring but at the time of writing this is the first one in the world. If you've ever tried to get a project into an enclosure you know what a challenge it can be. Connectors are a bit of work bu
- COM-23649
- SparkFun
-
1:
$2.67
-
Non-Stocked
|
Mouser Part #
474-COM-23649
|
SparkFun
|
SparkFun Accessories This is a right angle 5mm addressable LED. It sounds boring but at the time of writing this is the first one in the world. If you've ever tried to get a project into an enclosure you know what a challenge it can be. Connectors are a bit of work bu
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Optoelectronics
|
RGB Addressable CBI LED 5mm - Right Angle
|
|
|
|
SparkFun Accessories This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro
- DEV-16442
- SparkFun
-
1:
$36.13
-
Non-Stocked
|
Mouser Part #
474-DEV-16442
|
SparkFun
|
SparkFun Accessories This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
No
|
Qwiic Pro Micro BoogieBoards
|
|
|