Interface IC's Accessories

Results: 41
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (CAD) Filter the results in the table by unit price based on your quantity.
Qty. RoHS Product
Type
SparkFun SparkFun Accessories This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only 48In Stock
Min.: 1
Mult.: 1

Cables
SparkFun SparkFun Accessories SOIC to DIP Adapter - 28-Pin 13In Stock
25On Order
Min.: 1
Mult.: 1

Adapters
SparkFun SparkFun Accessories This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of you 11In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
Datasheet
23In Stock
Min.: 1
Mult.: 1

Qwiic Button with Green LEDs
SparkFun SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
Datasheet
17In Stock
Min.: 1
Mult.: 1
Breakout Boards
SparkFun SparkFun Accessories SOIC to DIP Adapter - 20-Pin 25In Stock
Min.: 1
Mult.: 1

Adapters
SparkFun SparkFun Accessories This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need 11 general I/O pins to interf
More Info Available
Min.: 1
Mult.: 1

DFRobot DFRobot Accessories Interface Cable SMA to U.FL Non-Stocked
Min.: 1
Mult.: 1

Cables
SparkFun SparkFun Accessories The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se Non-Stocked
Min.: 1
Mult.: 1

Sensors
Pipo Interfaces Crowd Supply Accessories Plug and play device between hardware and audiovisual software. Set contains Pipo Motion, Pipo Analog, Pipo Range
Datasheet
Lead-Time 7 Weeks
Min.: 1
Mult.: 1

Accessories Plug and Play Devices
Pipo Interfaces Crowd Supply Accessories A complete Pipo Motion device kit. Comes with its case, battery, and a strap to fix it anywhere you like..
Datasheet
Lead-Time 7 Weeks
Min.: 1
Mult.: 1

PIPO Modules Wireless MIDI & OSC Sensing
SparkFun SparkFun Accessories This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 11 general I/O pins to interface to this Non-Stocked Lead-Time 16 Weeks
Min.: 1
Mult.: 1

SparkFun COM-18562
SparkFun SparkFun Accessories This is a 12-pin multi-purpose interface cable from Xsens. This is the same cable that is included in the MTi-630R and MTi-670G IMU starter kits. Non-Stocked
Min.: 1
Mult.: 1