|
|
SparkFun Accessories Polymer Lithium Ion Battery-110mAh
- PRT-13853
- SparkFun
-
Shipping Restricted
|
Mouser Part #
474-PRT-13853
|
SparkFun
|
SparkFun Accessories Polymer Lithium Ion Battery-110mAh
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories Lithium Ion Battery - 850mAh
- PRT-13854
- SparkFun
-
Shipping Restricted
|
Mouser Part #
474-PRT-13854
|
SparkFun
|
SparkFun Accessories Lithium Ion Battery - 850mAh
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories If you need some juice this 6Ah Lithium Ion Battery is for you. These are very compact batteries based on Lithium Ion chemistry. This is the highest energy density currently in production. Each cell outputs a nominal 3.7V at 6000mAh! This solid 3 ce
- PRT-13856
- SparkFun
-
Shipping Restricted
|
Mouser Part #
474-PRT-13856
|
SparkFun
|
SparkFun Accessories If you need some juice this 6Ah Lithium Ion Battery is for you. These are very compact batteries based on Lithium Ion chemistry. This is the highest energy density currently in production. Each cell outputs a nominal 3.7V at 6000mAh! This solid 3 ce
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories Teensy Header Kit
- PRT-13925
- SparkFun
-
1:
$3.43
-
66In Stock
|
Mouser Part #
474-PRT-13925
|
SparkFun
|
SparkFun Accessories Teensy Header Kit
|
|
66In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Jumper Wires Premium 4 in M/M-26 AWG 30P
- PRT-14284
- SparkFun
-
1:
$4.27
-
32In Stock
|
Mouser Part #
474-PRT-14284
|
SparkFun
|
SparkFun Accessories Jumper Wires Premium 4 in M/M-26 AWG 30P
|
|
32In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories ESP32 Thing Stackable Header Set
- PRT-14311
- SparkFun
-
1:
$3.81
-
304In Stock
|
Mouser Part #
474-PRT-14311
|
SparkFun
|
SparkFun Accessories ESP32 Thing Stackable Header Set
|
|
304In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Headers
|
ESP32 Thing Stackable Header Set
|
|
|
|
SparkFun Accessories Large Jumper Wire Kit - 700pcs
- PRT-14671
- SparkFun
-
1:
$63.39
-
19In Stock
|
Mouser Part #
474-PRT-14671
|
SparkFun
|
SparkFun Accessories Large Jumper Wire Kit - 700pcs
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device com
- PRT-16766
- SparkFun
-
1:
$1.14
-
508In Stock
|
Mouser Part #
474-PRT-16766
|
SparkFun
|
SparkFun Accessories Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device com
|
|
508In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
|
|
|
|
SparkFun Accessories This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fully compatible w
- PRT-17152
- SparkFun
-
1:
$2.81
-
131In Stock
-
110On Order
|
Mouser Part #
474-PRT-17152
|
SparkFun
|
SparkFun Accessories This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fully compatible w
|
|
131In Stock
110On Order
|
|
Min.: 1
Mult.: 1
|
|
|
Header Kits
|
Teensy Stackable Header Kit
|
|
|
|
SparkFun Accessories This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more
- PRT-17259
- SparkFun
-
1:
$3.31
-
330In Stock
|
Mouser Part #
474-PRT-17259
|
SparkFun
|
SparkFun Accessories This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more
|
|
330In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Cables
|
|
|
|
|
SparkFun Accessories This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the boa
- PRT-21570
- SparkFun
-
1:
$3.81
-
59In Stock
|
Mouser Part #
474-PRT-21570
|
SparkFun
|
SparkFun Accessories This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the boa
|
|
59In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Headers
|
GPIO - Female
|
|
|
|
SparkFun Accessories This is a simple and easy to use battery box for powering a micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST connector. This version also features an on/off switch making it easy to turn the micro:bit on and o
- PRT-24510
- SparkFun
-
1:
$7.55
-
22In Stock
|
Mouser Part #
474-PRT-24510
|
SparkFun
|
SparkFun Accessories This is a simple and easy to use battery box for powering a micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST connector. This version also features an on/off switch making it easy to turn the micro:bit on and o
|
|
22In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Battery Holders
|
2 AAA
|
|
|
|
SparkFun Accessories Servo - Generic (Sub-Micro Size)
- ROB-09065
- SparkFun
-
1:
$19.75
-
38In Stock
|
Mouser Part #
474-ROB-09065
|
SparkFun
|
SparkFun Accessories Servo - Generic (Sub-Micro Size)
|
|
38In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Accessories
|
AC, DC & Servo Motor
|
|
|
|
SparkFun Accessories Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach
- ROB-09347
- SparkFun
-
1:
$31.26
-
23In Stock
|
Mouser Part #
474-ROB-09347
|
SparkFun
|
SparkFun Accessories Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach
|
|
23In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories No this isn't a tank tread this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for efficient mounting. Sometimes called a "drag chain " each carrier can be used in projects with a large nu
- ROB-13207
- SparkFun
-
1:
$25.16
-
29In Stock
-
21On Order
|
Mouser Part #
474-ROB-13207
|
SparkFun
|
SparkFun Accessories No this isn't a tank tread this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for efficient mounting. Sometimes called a "drag chain " each carrier can be used in projects with a large nu
|
|
29In Stock
21On Order
|
|
Min.: 1
Mult.: 1
|
|
|
Chains
|
Cable Carrier - 10 mm x 15 mm
|
|
|
|
SparkFun Accessories The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply
- ROB-16413
- SparkFun
-
1:
$19.35
-
57In Stock
|
Mouser Part #
474-ROB-16413
|
SparkFun
|
SparkFun Accessories The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply
|
|
57In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Motors & Accessories
|
Hobby Motor
|
|
|
|
SparkFun Accessories Flex Sensor 4.5"
- SEN-08606
- SparkFun
-
1:
$33.05
-
16In Stock
|
Mouser Part #
474-SEN-08606
|
SparkFun
|
SparkFun Accessories Flex Sensor 4.5"
|
|
16In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st
- SEN-13329
- SparkFun
-
1:
$21.46
-
63In Stock
|
Mouser Part #
474-SEN-13329
|
SparkFun
|
SparkFun Accessories This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st
|
|
63In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Line Follower Array Follower Array
- SEN-13582
- SparkFun
-
1:
$65.58
-
9In Stock
|
Mouser Part #
474-SEN-13582
|
SparkFun
|
SparkFun Accessories Line Follower Array Follower Array
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Load Cell - 200kg, S-Type (TAS501)
- SEN-14282
- SparkFun
-
1:
$161.65
-
6In Stock
-
3On Order
|
Mouser Part #
474-SEN-14282
|
SparkFun
|
SparkFun Accessories Load Cell - 200kg, S-Type (TAS501)
|
|
6In Stock
3On Order
|
|
Min.: 1
Mult.: 1
|
|
|
Accessories
|
S-Type, IP66, Compression and Tension
|
|
|
|
SparkFun Accessories The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a
- SEN-14480
- SparkFun
-
1:
$27.22
-
30In Stock
|
Mouser Part #
474-SEN-14480
|
SparkFun
|
SparkFun Accessories The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a
|
|
30In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breakout Boards
|
Triple Axis Accelerometer Sensor
|
|
|
|
SparkFun Accessories If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is
- SEN-14520
- SparkFun
-
1:
$7.70
-
55In Stock
|
Mouser Part #
474-SEN-14520
|
SparkFun
|
SparkFun Accessories If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is
|
|
55In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breakout Boards
|
Capacitive Touch Sensor
|
|
|
|
SparkFun Accessories The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout which includes the MAX30101 a highly sensitive optical sensor that succeeds the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photodio
- SEN-16474
- SparkFun
-
1:
$55.65
-
25In Stock
|
Mouser Part #
474-SEN-16474
|
SparkFun
|
SparkFun Accessories The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout which includes the MAX30101 a highly sensitive optical sensor that succeeds the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photodio
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breakout Boards
|
|
|
|
|
SparkFun Accessories This is the connector assembly used in the RTK Facet and RTK Facet L-Band and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! Note: This
- SPX-24706
- SparkFun
-
1:
$68.55
-
1In Stock
|
Mouser Part #
474-SPX-24706
|
SparkFun
|
SparkFun Accessories This is the connector assembly used in the RTK Facet and RTK Facet L-Band and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! Note: This
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Replacement Parts
|
RTK - Facet Connector Assembly v12
|
|
|
|
SparkFun Accessories Always always always wear eye protection while soldering. This is a golden rule we all know but sometimes overlook. Luckily with these SparkFun Safety Glasses you'll have a pair of lightweight economical and stylish lenses to protect your precio
- SWG-11046
- SparkFun
-
1:
$7.78
-
14In Stock
|
Mouser Part #
474-SWG-11046
|
SparkFun
|
SparkFun Accessories Always always always wear eye protection while soldering. This is a golden rule we all know but sometimes overlook. Luckily with these SparkFun Safety Glasses you'll have a pair of lightweight economical and stylish lenses to protect your precio
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
Canada